John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Replace Fuel Check Valve 4. Install fuel filter onto guide pins on fuel filter base. Hold filter firmly against base. 5. Secure bottom retaining spring first, then secure top retaining spring. 6. Install drain plug, shown installed. Tighten bleed plug and drain plug securely. Do not overtighten. 7. Open fuel shut-off valve and bleed fuel system. (See BLEED THE FUEL SYSTEM, in Group 115.) RG5867 -UN-19AUG91 RG,CTM42,G35,3 -19-03OCT92 REPLACE FUEL CHECK VALVE IMPORTANT: Remove fuel check valve only for replacement purposes, since O-ring seals tightly in bore, removal usually damages check valve assembly. 1. Drain and remove fuel filter (A) as described earlier in this group. 2.

Remove fuel filter inlet line (B), (shown removed). RG5868 -UN-19AUG91 3. Inspect and clean fuel filter base as described later in this group. 4. Remove check valve adapter housing (C) from fuel filter base, and discard. 5. Install new check valve assembly and tighten securely. 6. Install fuel inlet line and tighten connection 17 N·m (13 lb-ft)(150 in-lb) maximum. DO NOT overtighten. 7. Install fuel filter and bleed fuel system. (See BLEED THE FUEL SYSTEM, in Group 115.) 35 7 CTM42 (24MAR95) 35-7 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G35,4 -19-17MAR95 160101 PN=284