Fuel System/Clean or Replace Electric Fuel Supply Pump Filter Screen CLEAN OR REPLACE ELECTRIC FUEL SUPPLY PUMP FILTER SCREEN—6076TRW31 ENGINES Electric supply pump filter screen element (B) should be cleaned frequently under normal engine operating conditions. If output flow or pressure is below specifications, it may be result of a partially obstructed filter screen. Refer to operator’s manual for recommended hourly maintenance interval. 1. Remove cap screws from cover plate (D). Remove cover and gasket (C) from pump (A). 2. With clean hands, remove filter screen from pump. IMPORTANT: Do not clean or touch screen or inside of pump with cotton cloth.
The smallest piece of lint may cause fuel system contamination. RG6452 -UN-13OCT92 3. Using compressed air, clean by blowing air through filter from inside to outside. If screen is damaged, either by holes or sealing surfaces, it must be replaced. 4. Install screen with flange end of screen against filter plate gasket. 5. Install cover plate. A—Electric Fuel Supply Pump B—Filter Screen Element C—Gasket D—Cover Plate RG,CTM42,G35,82-19-17MAR95 35 20 CTM42 (24MAR95) 35-20 6076 Diesel Engines—S.N. (500000— ) 160101 PN=297