Fuel System/Remove Fuel Injection Nozzles NOTE: The socket portion of JDE92 Nozzle Wrench (A) may be used to remove nozzles from cylinder head. 13. If JDE92 Nozzle Wrench is not used, use a 24 mm (15/16 in.) deep socket on nozzle gland nut to remove nozzles. Gland nut will act as a jack screw to raise nozzle out of cylinder head bore. Remove hardened steel washer from injection nozzle bore if it does not come out with nozzle. RG5757 -UN-05AUG91 14. To prevent debris from entering combustion chamber after nozzles are removed, insert a 12.7 mm (1/2 in.) hardwood dowel in nozzle bore. RG,CTM42,G35,28-19-03OCT92 35 39 CTM42 (24MAR95) 35-39 6076 Diesel Engines—S.N. (500000— ) 160101 PN=316