John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Diagnose Injection Nozzle Malfunction DIAGNOSE INJECTION NOZZLE MALFUNCTION Problem Possible Cause Suggested Remedy Failed Carbon Stop Seal Washer Nozzle replaced without using Install new seal or washer. new seal or washer. Carbon stop seal groove not Clean groove. Install new seal. cleaned when new seal was installed. Incorrect Opening Pressure Improper adjustment. Adjust opening pressure. Broken spring. Replace spring. Nozzle Will Not Open Plugged orifices. Clean. Chipped orifices. Replace nozzle. Bottomed lift screw. Adjust lift screw. Poor Spray Pattern Plugged orifices. Clean. Chipped orifices. Replace nozzle. Cracked nozzle tip. Replace nozzle.

Poor Atomization Plugged orifice. Clean. Chipped orifice. Replace nozzle. Cracked nozzle tip. Replace nozzle. Valve not free. See “Inconsistent Chatter”. Inconsistent Chatter Spring components misaligned. Adjust opening pressure. Varnish on valve. Clean guide area. Deposits in seat area. Clean seat. 35 40 Bent valve. Replace nozzle. Distorted body. Replace nozzle. CTM42 (24MAR95) 35-40 6076 Diesel Engines—S.N. (500000— ) S11,3010,NS -19-08APR94 160101 PN=317