Fuels, Lubricants, and Coolant/Recommended Engine Coolant RECOMMENDED ENGINE COOLANT Solutions of antifreeze and supplemental coolant additives MUST be used year-round for freeze protection, boil-over protection, and to provide a stable, non-corrosive environment for seals, hoses and metal engine parts. • JOHN DEERE ANTIFREEZE/SUMMER COOLANT CONCENTRATE This product contains ethylene glycol (low silicate antifreeze) and supplemental coolant additives (SCA’s). It must be mixed with quality water, as described later in this section, before adding to the engine cooling system.
The proportion of water to be used depends upon the lowest freeze protection temperature desired according to the following table: John Deere Prediluted Antifreeze/Summer Coolant is preferred. John Deere Antifreeze/Summer Coolant Concentrate and John Deere COOL-GARD™, where available, are also recommended. 02 7 Refer to your vehicle operator’s manual for the service life of these products. % CONCENTRATE FREEZE PROTECTION LIMIT 40 -24˚ C (-12˚ F) 50 -37˚ C (-34˚ F) 60 -52˚ C (-62˚ F) • JOHN DEERE PREDILUTED ANTIFREEZE/SUMMER COOLANT • JOHN DEERE COOL-GARD™ This product contains all the necessary ingredients that make up the proper coolant solution:
chemically pure water, ethylene glycol (low silicate antifreeze), and supplemental coolant additives (SCA’s). It is ready to use; no mixing is required. In certain geographical areas, John Deere COOL-GARD is marketed for use in the engine cooling system. This product contains all the necessary ingredients that make up the proper coolant solution: chemically pure water, ethylene glycol (low silicate antifreeze), and supplemental coolant additives (SCA’s). It is ready to add to cooling system as is; no mixing or supplemental coolant additives required. Contact your John Deere Parts Network for local availability. John Deere Prediluted Antifreeze/Summer Coolant permits extended service life.
RG,COOL2,CTM -19-23FEB95 CTM42 (24MAR95) 02-7 6076 Diesel Engines—S.N. (500000— ) 160101 PN=26