Fuel System/Inspect Nozzle Holder 6. Examine lapped surfaces on intermediate plate (A) for nicks, scratches, or worn areas which would permit fuel to leak past. RG2248 -UN-20APR89 7. Replace intermediate plate if lapped surfaces are worn or damaged. RG2249 -UN-20APR89 IMPORTANT: Do not lap machined surfaces of intermediate plate. Dowel pins (B) in plate have to be removed before surfaces can be lapped. Removing dowels is not recommended as removal is likely to damage them. Replacement dowels are not available as service parts. 8. Inspect spring seat for splitting, cracking, or excessive wear. Replace seat if any of these conditions are evident.
RG,CTM42,G35,75-19-03OCT92 35 52 CTM42 (24MAR95) 35-52 6076 Diesel Engines—S.N. (500000— ) 160101 PN=329