Fuel System/Assemble Fuel Injection Nozzle 3. Check passage in leak-off connector to see that it is open. 4. Blow through connector passage with compressed air. 5. Inspect the M6 x 1 threads (A) for general condition. Replace connector if threads are damaged and cannot be restored to a serviceable condition. RG5886 -UN-19AUG91 RG,CTM42,G35,34-19-03OCT92 ASSEMBLE FUEL INJECTION NOZZLE IMPORTANT: Be sure to install correct nozzle assembly on nozzle holder. Do not intermix different size nozzle assemblies. RG5958 -UN-30AUG91 To help determine correct nozzle assembly for each application, note markings on lower part of nozzle. The illustration shows a nozzle marked 7 x 0.255.
The number “7” (A) indicates the number of orifices and “0.255” (B) indicates the size of each orifice in millimeters. IMPORTANT: Immerse parts in clean fuel before assembly. DO NOT dry parts with towels or compressed air. Dust particles might collect and stay on pressure faces of nozzle valve and nozzle holder. RG,CTM42,G35,35-19-03OCT92 35 54 CTM42 (24MAR95) 35-54 6076 Diesel Engines—S.N. (500000— ) 160101 PN=331