John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Assemble Fuel Injection Nozzle 1. Install a new O-ring (A) on nozzle holder. 2. Apply PT569 NEVER-SEEZ compound liberally to inside bore of gland nut to prevent gland nut from seizing on holder body. Slide gland nut over nozzle holder until it bottoms against shoulder (B). RG5960 -UN-30AUG91 NOTE: Bosch nozzles have a snap ring toward bottom end that gland nut bottoms against, and an O-ring and snap ring at top end of gland nut to keep it captive. Gland nut is installed from top of nozzle holder on Bosch nozzles. Nippondenso Shown (Bosch Similar) RG,CTM42,G35,58-19-03OCT92 3. Place shims (A), spring (B), and spring seat (C) in nozzle holder (D) while still wet with diesel fuel.

NOTE: Make sure intermediate plate (E) is free of any foreign material before reassembling. RG5957 -UN-30AUG91 A—Shims B—Spring C—Spring Seat D—Nozzle Holder E—Intermediate Plate RG,CTM42,G35,59-19-12SEP91 4. Position intermediate plate (A) on nozzle holder (B). Dowel pins (C) in plate will permit installation only one way. 5. Insert nozzle valve (D) into nozzle (E) while holding parts below diesel fuel level in pan. RG5961 -UN-30AUG91 A—Intermediate Plate B—Nozzle Holder C—Dowel Pins D—Nozzle valve E—Nozzle 35 55 RG,CTM42,G35,36-19-03OCT92 CTM42 (24MAR95) 35-55 6076 Diesel Engines—S.N. (500000— ) 160101 PN=332