John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Inspect and Clean Cylinder Head Nozzle Bore INSPECT AND CLEAN CYLINDER HEAD NOZZLE BORE 1. Inspect condition of threads for gland nut. Threads are metric (M28 x 1.5). RG5251 -UN-14DEC88 2. Inspect condition of nozzle seating surface in cylinder head. Cylinder head threads and nozzle seating surface must be free of debris and carbon deposits. IMPORTANT: If injection nozzle gland nut threads are not clean, a false torque wrench reading may be obtained when injection nozzle is installed. This may prevent injection nozzle from seating properly in cylinder head. 3. Clean threads which have light foreign deposits using an electric drill and D17030BR Thread Cleaning Brush.

Work brush up and down several times to clean threads. S55,3010,AU -19-03OCT92 4. Clean threads with heavy foreign deposits or clean up damaged threads by using JDF5 Tap (M28 x 1.5 mm). Be sure to start tap straight to avoid possible cross-threading. A light coat of grease on tap will help collect foreign deposits on tap and prevent them from falling into nozzle bore. 5. After cleaning threads, insert a 13 mm (1/2 in.) tapered hardwood dowel to plug nozzle tip bore. R28263N -UN-20DEC88 6. Blow out debris from nozzle cavity with compressed air; then remove wood dowel. 35 58 RG,CTM42,G35,37-19-03OCT92 CTM42 (24MAR95) 35-58 6076 Diesel Engines—S.N. (500000— ) 160101 PN=335