Fuel System/Install Fuel Injection Nozzles 6. Position inner socket (D) over nozzle holder and engage with flats at top of nozzle holder. 7. Place outer socket (C) portion of JDE92 Nozzle Socket on gland nut with socket “window” (B) facing outward. 8. Insert handle (A) through window into inner socket. Ball detent in handle will keep it secured to inner socket. NOTE: Handle simulates position of leak-off connector, which must be square with engine to permit proper installation of leak-off lines. RG5758 -UN-05AUG91 A—Handle B—Window C—Outer Socket D—Inner Socket RG,CTM42,G35,42-19-15SEP94 9. Tighten injection nozzle gland nut to 88 N·m (65 lb-ft).
Keep handle (A) pointing straight out while tightening. Socket window (B) is cut deep enough to obtain a new “bite” without removing inner socket. RG5759 -UN-05AUG91 10. Be sure O-ring is positioned against injection nozzle gland nut. RG,CTM42,G35,43-19-03OCT92 11. Install leak-off connectors (A) with O-rings on injection nozzles. Tighten securely. RG5890 -UN-19AUG91 35 60 RG,CTM42,G35,44-19-10SEP91 CTM42 (24MAR95) 35-60 6076 Diesel Engines—S.N. (500000— ) 160101 PN=337