Engine Tune-Up and Break-In/Preliminary Engine Testing PRELIMINARY ENGINE TESTING Before tuning-up an engine, determine if a tune-up will restore operating efficiency. If in doubt, the following preliminary tests will help determine if the engine can be tuned-up. Choose from the following procedures only those necessary to restore the unit. 2. With engine stopped, inspect engine coolant for oil film. With engine running, inspect coolant for air bubbles. Either condition would indicate problems which require engine repairs rather than just a tune-up. 1. After engine has stopped for several hours, loosen crankcase drain plug and watch for any water to seep out.
A few drops could be due to condensation, but any more than this would indicate problems which require engine repairs rather than just a tune-up. 3. Perform a dynamometer test and record power output. See DYNAMOMETER TEST later in this group. Repeat dynamometer test after tune-up. Compare power output before and after tune-up. 4. Perform compression test (See Group 105). S11,22010,BW -19-08APR94 100 2 CTM42 (24MAR95) 100-2 6076 Diesel Engines—S.N. (500000— ) 160101 PN=341