Engine Tune-Up and Break-In/General Tune-Up Recommendations GENERAL TUNE-UP RECOMMENDATIONS The following services are recommended each time a tune-up is performed. Disregard those services that do not apply to any particular application. Operation Detailed Reference Check overall engine for fuel, lubricant, and coolant leaks. Repair leaks as necessary. Change engine oil and filters. Operator’s Manual Lubricate PTO clutch internal levers and linkage. Operator’s Manual Replace fuel filter and water separator, if equipped. Group 35/Operator’s Manual Clean crankcase ventilation assembly. This Group/Operator’s Manual Replace air cleaner elements and check air intake system.
This Group/Operator’s Manual Check exhaust system. This Group Check and service engine cooling system. This Group/Operator’s Manual Check and adjust fan and alternator belts. Operator’s Manual Replace if necessary. Check electrical system. This Group Check crankshaft vibration damper. Group 15/Operator’s Manual Inspect turbocharger and check turbocharger boost pressure. Group 110 Check fuel injection system: Check engine-to-injection pump timing, clean injection nozzles, and adjust nozzle opening pressure. Group 35 and 115 Check engine oil pressure. Adjust if necessary. Group 105 Check engine valve clearance. Adjust if necessary. Group 05/Operator’s Manual Check engine speeds.
Adjust if necessary. Group 115 Check engine performance on dynamometer. Group 105 100 3 CTM42 (24MAR95) 100-3 6076 Diesel Engines—S.N. (500000— ) RG,CTM6,G100,2 -19-08APR94 160101 PN=342