John Deere 400 6076 — John Deere 400 6076 User Manual

Engine Tune-Up and Break-In/Perform Engine Break-In PERFORM ENGINE BREAK-IN Use a dynamometer to perform the following break-in procedure. If necessary, engine break-in can be performed without a dynamometer if under controlled operating conditions. ENGINE BREAK-IN AFTER MAJOR OVERHAUL Time Load Engine Speed 5 Minutes No Load 850 rpm 5 Minutes No Load 1500—2000 rpm 5 Minutes 1/4 Load 1900—2100 rpm 10 Minutes 1/2 Load 1900—2100 rpm 10 Minutes 1/2—3/4 Load 1900—2100 rpm 10 Minutes 3/4—Full Load Rated Speed IMPORTANT: DO NOT use TORQ-GARD SUPREME PLUS-50™ engine oil during break-in period of a new engine or engine that has had a major overhaul.

TORQ-GARD SUPREME PLUS-50 oil will not allow a new or overhauled engine to properly wear during this break-in period. Check and readjust valve clearance as necessary. Cylinder head retorque is not required. (See Group 05, Cylinder Head and Valves.) During break-in, periodically check engine oil pressure and coolant temperature. Also check for signs of fuel, oil, or coolant leaks. Sufficiently load engine during the first 100 hours of operation, but, avoid over-loads, excessive idling, and extended no-load operation. A second 100-hour service interval with John Deere Engine Break-In Oil may be required if the engine is operated under light loads during the first 100-hour break-in period.

Fill engine crankcase with John Deere Break-In oil to proper level for use during the break-in operation. This oil is specifically formulated to enhanced break-in of John Deere diesel engines. Add John Deere Break-In oil as needed to maintain the specified oil level during break-in period. After 100 hours maximum, drain break-in oil and change oil filter. Fill crankcase with John Deere TORQ-GARD SUPREME PLUS-50™ or other heavy-duty diesel engine oil within the same service classification as recommended in this manual. See DIESEL ENGINE OIL in Group 02, Fuels, Lubricants, and Coolant. RG,CTM86,G100,5-19-26OCT94 100 6 CTM42 (24MAR95) 100-6 6076 Diesel Engines—S.N. (500000— ) 160101 PN=345