John Deere 400 6076 — John Deere 400 6076 User Manual

Engine System Operation and Test/Diagnosing Head Gasket Joint Failures DIAGNOSING HEAD GASKET JOINT FAILURES Head gasket failures generally fall into three categories: • Combustion seal leakage. • Coolant seal leakage. • Oil seal leakage. Combustion seal leakage failures occur when combustion gases escape between cylinder head and head gasket combustion flange, or between combustion flange and cylinder liner. Leaking combustion gases may vent to an adjacent cylinder, to a coolant or oil passage, or externally. Coolant or oil seal leakage failures occur when oil or coolant escapes between cylinder head and gasket body, or between cylinder block and gasket body.

The oil or coolant may leak to an adjacent coolant or oil passage, or externally. Since oil and coolant passages are primarily on right hand (camshaft) side of engine, fluid leaks are most likely to occur in that area. RG6449 -UN-13OCT92 Follow these diagnostic procedures when a head gasket joint failure occurs, or is suspected. 1. Before starting or disassembling engine, conduct a visual inspection of machine, and note any of the A—Combustion Sealing Areas following: B—Oil Sealing Areas (Push Rod) C—Coolant Sealing Areas D—Cylinder Head Cap Screws • Oil or coolant in head gasket seam, or on adjacent surfaces. Especially right rear corner of gasket joint.

• Displacement of gasket from normal position. • Discoloration or soot from combustion gas leakage. • Leaking radiator, overflow tank, or hoses. • Leaking coolant from water pump weep hole. • Damaged or incorrect radiator, fan, or shroud. • Obstructed air flow or coolant flow. • Worn or slipping belts. • Damaged or incorrect pressure cap. • Presence of oil in coolant. • Low coolant levels. • Improper coolant. • Unusually high or low oil levels. • Oil degradation, dilution, or contamination. • Correctly specified injection pump. • Indications of fuel or timing adjustments. • Unburned fuel or coolant in exhaust system. 105 14 CTM42 (24MAR95) 105-14 6076 Diesel Engines—S.N.

(500000— ) CTM42,G105,16 -19-08APR94 160101 PN=363