John Deere 400 6076 — John Deere 400 6076 User Manual

Engine System Operation and Test/Check Engine Oil Pressure CHECK ENGINE OIL PRESSURE NOTE: JDG782 Oil Galley Plug Tool must be used to remove galley plugs on current engine. 1. Remove pipe plug (A) from main oil gallery and install No. 0070 (D1) Fitting (A), No. 2106 (19-HP) Hose (B), and JT05472* Gauge (C). IMPORTANT: To achieve an accurate oil pressure reading, warm up engine to 115˚C (240˚F). 2. Measure engine oil pressure. RG5924 -UN-20AUG91 OIL PRESSURE SPECIFICATIONS Minimum No Load at 850 rpm (Slow Idle) . . . . . . . . . . . . . . . . . . . . . 138 kPa (1.4 bar) (20 psi) Maximum Full Load at 1800—2200 rpm (Rated Speed) . . . . . . . . . . . . . . . . . . .

400 kPa (4.0 bar) (58 psi) NOTE: The regulating valve is designed so that adjustment of oil pressure should not be required. * Part of JT05470 (D15027NU) Universal Pressure Test Kit RG,CTM42,105,9A-19-14FEB95 105 22 CTM42 (24MAR95) 105-22 6076 Diesel Engines—S.N. (500000— ) 160101 PN=371