Fuel System Operation and Test/Check and Adjust Rotary fuel pump Dynamic Timing 5. Use JDE81-4 Timing Pin in flywheel timing hole (C) to ensure engine is NOT stopped at TDC. Magnetic pick-up probe will enter TDC timing hole in flywheel and be damaged when engine is started. An air gap of 0.64 mm (0.025 in.) is recommended between tip of probe and flywheel face. RG7288 -UN-07FEB95 115 4 6. Install JDG821 Magnetic Pick-up Adapter (B) into flywheel housing. Lightly tap adapter to lock into position. Insert probe of magnetic pick-up (A) into adapter until it contacts the flywheel. Pull probe back out to provide 0.64 mm (0.025 in.) air gap. 7.
Plug magnetic pick-up adapter connector into JT07170 meter port marked MP. A—Magnetic Pick-up B—JDG821 Magnetic Pick-up Adapter C—Flywheel Timing Hole RG,CTM42,115,47-19-17MAR95 CTM42 (24MAR95) 115-4 6076 Diesel Engines—S.N. (500000— ) 160101 PN=387