John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Mechanical Fuel Supply Pump Operation Operation MECHANICAL FUEL SUPPLY PUMP OPERATION—CONTINUED 115 17 RG5787 -UN-06AUG91 A—Camshaft E—Plunger Spring I—Suction Valve M—Intermediate Stroke B—Roller Tappet F—Suction Chamber J—Fuel Inlet Position C—Pressure Spindle G—Pressure Valve K—Hand Primer Pump N—Suction and Discharge D—Plunger H—Pressure Chamber L—Fuel Outlet Stroke Position As the pump camshaft (A) rotates toward the “high cam” intermediate stroke position (M), the roller tappet (B) and pressure spindle (C) cause the plunger (D) to move against and compress the plunger spring (E).

Movement of the plunger pushes the fuel from the pressure chamber, and delivers it to the fuel filters and injection pump. At the same time, plunger suction pressure is permitting fuel to enter the suction chamber through the suction valve (I). With the suction chamber charged with fuel, the pumping cycle begins again. Plunger movement forces the fuel out of the suction chamber (F), through the pressure valve (G), and into the pressure chamber (H). The amount of fuel discharged from the suction chamber is equal to the amount of fuel delivered for each stroke of the plunger. Towards the end of the intermediate stroke, the spring-loaded pressure valve closes again.

Fuel is allowed to flow in around the pressure spindle to lubricate the spindle as it moves back and forth in housing. To prevent the fuel from entering the pump crankcase, a rubber O-ring is positioned in the spindle bore of housing at the roller tappet end. As the camshaft rotates toward the “low cam” or suction and discharge position (N), plunger spring pressure causes the plunger, pressure spindle, and roller tappet to follow the camshaft. Unscrewing the knurled knob on the hand primer pump (K) and pulling upward causes the suction valve to open and fuel to flow into the suction chamber.

When the hand plunger is pushed downward, the suction valve closes, and fuel is forced out of the pressure valve. RG,CTM42,115,5 -19-28OCT92 CTM42 (24MAR95) 115-17 6076 Diesel Engines—S.N. (500000— ) 160101 PN=400