John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Diagnosing Mechanical Fuel Supply Pump Malfunctions DIAGNOSING MECHANICAL FUEL SUPPLY PUMP MALFUNCTIONS IMPORTANT: Visually inspect the fuel inlet fitting and pump filter for possible plugging before disassembling to determine cause of malfunction. Symptom Problem Solution 115 18 Low Supply Pump Output Restriction at fuel inlet fitting. Thoroughly clean fuel tank, lines, Pressure or Pump Not filters, and inlet fitting. Functioning Correctly Hand primer not screwed down Advise customer to tighten hand tight, allowing dirt to enter hand primer after use. primer plunger chamber (Nippondenso pumps only). Worn or pitted valves caused by Replace valves as required.

foreign material lodging in valve. Missing or broken spring(s). Replace spring(s). Broken spindle. Replace pump. Out of fuel. Add fuel to fuel tank. Fuel shut off at tank. Open fuel shut off valve. Restricted fuel line. Clean as required. Air leak in fuel line between pump Repair as required. and tank. Loose or damaged fuel line Repair. connetions. Hand primer left in upward position Bleed fuel system, gently push hand (Nippondenso pump only) primer down and tighten securely. Worn or damaged valve Repair or replace. assemblies/ Broken valve spring(s) Repair or replace. RG,CTM42,G35,48-19-28OCT92 CTM42 (24MAR95) 115-18 6076 Diesel Engines—S.N. (500000— ) 160101 PN=401