Fuel System Operation and Test/Bleed the Fuel System C. At Fuel Injection Pump: NOTE: This procedure is for engine applications with electric fuel supply pumps. 1. Loosen fuel return line at fuel injection pump. 2. Turn key switch “ON”. As soon as fuel flow is free from air bubbles, tighten fuel return line. 115 31 RG6483 -UN-26OCT92 RG,CTM42,G35,94-19-02NOV92 D. At Fuel Injection Nozzles: 1. Place throttle lever in fast idle position. 2. Using two open-end wrenches, loosen fuel line connection at No. 1 injection nozzle. 3. Crank engine with starting motor (but do not start engine), until fuel free from bubbles flows out of loosened connection. Retighten connection. RG6484 -UN-26OCT92 4.
Repeat procedure for remaining injection nozzles (if necessary) until all air has been removed from fuel system. RG,CTM42,G35,95-19-28OCT92 CTM42 (24MAR95) 115-31 6076 Diesel Engines—S.N. (500000— ) 160101 PN=414