John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Head and Valves/Cylinder Head and Valves Specifications CYLINDER HEAD AND VALVES SPECIFICATIONS—CONTINUED ITEM SPECIFICATION WEAR LIMIT Cylinder Firing Order . . . . . . . . . . . . . . . . . 1-5-3-6-2-4 Rocker Arm ID . . . . . . . . . . . . . . . . . . . . . 19.07—19.10 mm (0.7507—0.7520 in.) Rocker Arm Shaft OD . . . . . . . . . . . . . . . . 19.01—19.05 mm (0.7484—0.7500 in.) Cylinder Liner Height Above Block . . . . . . . . 0.050—0.127 mm (0.002—0.005 in.) Cylinder Head Reconditioning: Thickness of Head (Rocker Arm Cover Gasket Rail-to- Combustion Face) . . . . . . . . . . . . . . . . 155.45—155.71 mm (6.120—6.130 in.) Minimum Acceptable Thickness . . . . . . . .

154.69 mm (6.09 in.) Maximum Acceptable Head Out-of-Flat (Entire Length or Width) . . . . . . . . . . . . 0.102 mm (0.0040 in.) Combustion Face Surface Finish (Surface Grind Only) . . . . . . . . . . 60—110AA Maximum Wave Depth . . . . . . . . . . . . . 0.008 mm (0.0003 in.) Maximum Material Removal for Resurfacing Head . . . . . . . . . . . . . . . . 0.762 mm (0.0300 in.) 05 6 RG,CTM42,G5,2 -19-14FEB95 CYLINDER HEAD AND VALVES SPECIFICATIONS—CONTINUED TORQUES Cylinder Head-to-Cylinder Block: Refer to TORQUE-TURN FLANGED-HEAD CAP SCREWS—GRADE 180 and TORQUE-TO-YIELD FLANGED-HEAD CAP SCREWS—GRADE 180 MARKED “SPECIAL”, later in this group. Rocker Arm Shaft Clamps . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 N·m (55 lb-ft) Rocker Arm Cover-to-Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 N·m (6 lb-ft) (72 lb-in.) Intake Manifold-to-Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 N·m (35 lb-ft) Exhaust Manifold-to-Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 N·m (35 lb-ft) Valve Adjusting Screw Locknut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 N·m (20 lb-ft) CTM42 (24MAR95) 05-6 6076 Diesel Engines—S.N.

(500000— ) RG,CTM42,G5,33A-19-14FEB95 160101 PN=49