John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Head and Valves/Measure Cylinder Head Thickness MEASURE CYLINDER HEAD THICKNESS Measure head thickness (A) from valve cover gasket rail-to-combustion face. If cylinder head thickness is less than wear limit. DO NOT attempt to resurface. Install a new cylinder head. RG4421 -UN-23FEB89 NOTE: If necessary to resurface cylinder head, a MAXIMUM of 0.762 mm (0.030 in.) can be ground from new part dimension. Remove ONLY what is necessary to restore flatness. IMPORTANT: After resurfacing, check flatness as described earlier and check surface finish on combustion face of head. Check valve recess after grinding.

(See MEASURE VALVE RECESS, earlier in this group.) Valve seat or valve face may be ground to bring this characteristic within specification. 05 21 CYLINDER HEAD SPECIFICATIONS Thickness . . . . . . . . . . . . . . 155.45—155.71 mm (6.120—6.130 in.) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . . . . 154.69 mm (6.09 in.) Combustion Face Surface Finish (AA) . . . . . . . . . 0.015—0.0028 mm (60—110 micro-in.) Maximum Wave Depth . . . . . . . . . . . . . . . . . 0.008 mm (0.0003 in.) S11,2005,KZ -19-14SEP94 CTM42 (24MAR95) 05-21 6076 Diesel Engines—S.N. (500000— ) 160101 PN=64