Cylinder Head and Valves/Measure Valve Guides CLEAN VALVE GUIDES 1. Use a D17011BR Valve Guide Cleaning Brush to clean valve guides before inspection or repair. NOTE: A few drops of light oil or kerosene will help to fully clean the guide. RG5346 -UN-06DEC88 05 22 S11,2005,MY -19-28OCT92 MEASURE VALVE GUIDES 1. Measure valve guides (A) for wear using a telescope gauge (B) and micrometer. VALVE GUIDE SPECIFICATIONS R23984 -UN-09DEC88 I.D. Guide in a New Head . . . . . . . . . . . . . . . . . . . 9.51—9.54 mm (0.3745—0.3755 in.) New Guide-to-Valve Stem Clearance: Exhaust . . . . . . . . . . . . . . . . . 0.051—0.102 mm (0.002—0.004 in.) Intake . . . . . . . . . . . . . . . . . .
0.025—0.076 mm (0.001—0.003 in.) NOTE: Worn guides can allow a clearance of 0.15 mm (0.006 in.) and still be acceptable. Worn guides may be knurled to return them to specified clearance if valve-to-guide clearance is 0.25 mm (0.010 in.) or less. If clearance exceeds 0.25 mm (0.010 in.), install oversize valves. IMPORTANT: ALWAYS knurl exhaust valve guides before reaming to assure proper valve guide-to-stem clearance. S11,2005,MH -19-03MAY93 CTM42 (24MAR95) 05-22 6076 Diesel Engines—S.N. (500000— ) 160101 PN=65