Cylinder Head and Valves/Measure Valve Seats MEASURE VALVE SEATS 1. Measure valve seats for proper specifications listed below. 2. Using D11010KW Eccentrimeter, measure valve seat runout (D). 3. If valve seat is not within specification, recondition valve seat by grinding or replace valve seat inserts (A) if reconditioning is not possible. (See GRIND VALVE SEATS or INSTALL VALVE SEAT INSERTS, later in this group.) VALVE SEAT SPECIFICATIONS Valve Seat Angle (B) . . . . . . . . . . . . . . . . . . . . . . . . . . 30˚ ±0.50˚ Valve Seat Width (C): —Exhaust . . . . . . . . . . . . . . . . . . 2.0—3.8 mm (0.079—0.150 in.) —Intake . . . . . . . . . . . . . . . . . . . .
1.4—3.8 mm (0.055—0.150 in.) RG5248 -UN-06DEC88 05 24 Maximum Valve Seat Runout . . . . . . . . . . . . 0.051 mm (0.0020 in.) A—Valve Seat Insert B—Valve Seat Angle C—Valve Seat Width D—Valve Seat Runout S11,2005,MI -19-16SEP94 CTM42 (24MAR95) 05-24 6076 Diesel Engines—S.N. (500000— ) 160101 PN=67