Cylinder Head and Valves/Complete Final Assembly On Exhaust Manifold Side 11. Install water inlet (A) and water outlet (C) hoses. Tighten hose clamps securely. 12. Install aneroid line (B), if equipped, and tighten securely. 13. Install turbocharger (D) with couplings. Tighten cap screws to 47 N·m (35 lb-ft). (See INSTALL TURBOCHARGER in Group 30.) 14. If engine oil was drained from crankcase, install new oil filter and fill with clean oil of correct grade and viscosity. (See DIESEL ENGINE OIL in Group 02.) RG5885 -UN-13AUG91 15. Fill cooling system with clean coolant. (See ENGINE COOLANT SPECIFICATIONS in Group 02.) 16. Perform engine break-in as outlined later in this group.
(See PERFORM ENGINE BREAK-IN.) 05 41 A—Water Inlet Hose B—Aneroid Line C—Water Outlet Tube and Hose D—Turbocharger RG,CTM42,G5,32 -19-28OCT92 CTM42 (24MAR95) 05-41 6076 Diesel Engines—S.N. (500000— ) 160101 PN=84