Komatsu — 22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS

22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure safety at all times when operating or driving the machine, the user of the ma- chine must always carry out periodic maintenance. In addition, to further improve safety, the user should also carry out periodic replacement of the parts given in the table. These parts are particularly closely connected to safety and fire prevention. With these parts, the material changes as time passed, or they easily wear or deteriorate. However, it is difficult to judge the condition of the parts simply by periodic maintenance, so they should always be replaced after a fixed time has passed, regardless of their condition.

This is necessary to ensure that they always maintain their function completely. However, if these parts show any abnormality before the replacement interval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu distributor to replace the critical parts. No.

Safety critical parts for periodic replacement o’ty Replacement interval 0 Fuel spill hose 13 0 Fuel hose (Fuel tank - engine) 4 0 Fuel return hose 1 0 IH ose (Fan pump - fan motor) I I 2 Fuel hose (Fuel filter - engine) I I 2 @ 1 Hose (F an oil cooler - hydraulic tank) I I 2 0 Hose (Fan motor drain - hydraulic tank) 2 Every 2 years of 4000 hours, whichever comes sooner @ Hose (Torque converter outlet - torque converter oil cooler) 1 @ Hose (Torque converter oil cooler - power train oil pan) 1 Inspection hose assembly for power train pressure I I 13 Hose (Blade valve - blade cylinder) I I 4 Blade cylinder hose (outside of machine) I I 3 0 Hose (Hydraulic pump outlet - valve) 3 3-l 6