Komatsu — 23. MAINTENANCE SCHEDULE CHART

23. MAINTENANCE SCHEDULE CHART 23.1 MAINTENANCE SCHEDULE CHART SERVICE ITEM PAGE INITIAL 250 HOURS SERVICE (only after the first 250 hours) Replace fuel filter cartridge 3-54 Replace transmission filter element, transmission lubricating filter element and toraue converter filter element Change oil in power train (incl.

transmission case, torque converter case and bevel qear case) and clean strainer 3-55 3-58 Change oil in hydraulic tank, replace hydraulic filter element and clean strainer 3-62 Change oil in final drive case, replace filter element 3-64 Replace PPC (Proportional Pressure Control) filter element 3-66 Check engine valve clearance, adiust 3-68 WHEN REQUIRED Check, clean and reolace air cleaner element 3-27 Clean inside of cooling system 3-23 Check track tension 3-29 Check and tighten track shoe bolts 3-31 Adjust idler clearance 3-32 Reverse and replace the end bits and cutting edges 3-33 Clean, check radiator fin and oil cooler fin 3-35 Clean fuel tank strainer 3-36 Drain water, sediment from fuel tank 3-36 Check ether spray, replace ether cylinder 3-37 Check, adjust air conditioner 3-38 Check window washer fluid level, add fluid 3-39 CHECK BEFORE STARTING Check machine monitor 3-40 Check coolant level, add water 3-40 Check oil level in engine oil pan, add oil 3-42 Check fuel level, add fuel 3-41 Check oil level in power train case (incl.

transmission case, torque converter case and bevel oear case), add oil 3-43 Check brake pedal travel 3-43 Check dust indicator 3-44 3-l 9