Komatsu — 23. MAINTENANCE SCHEDULE CHART

23.

MAINTENANCE SCHEDULE CHART SERVICE ITEM (CHECK BEFORE STARTING) Check that lamps light up 3-44 Check horn sound 3-44 Check backup alarm sound 3-44 Check seat belt for wear or damage 3-44 Check for water and sediment in water separator, drain water 3-44 EVERY 250 HOURS SERVICE Lubricating 3-45 l Equalizer bar side shaft (4 places) 3-45 l Equalizer bar center shaft (1 place) 3-45 l Blade lift cylinder support shaft and yoke (6 places) 3-45 l Blade arm ball joint (3 places) 3-45 l Blade oblique arm ball joint (2 places) 3-45 l Ripper cylinder pin centralized greasing point (1 place) 3-46 l Ripper arm pin (Front) (2 places) 3-46 l Ripper arm pin (Rear) (2 places) 3-46 Change oil in engine oil pan, replace engine oil filter cartridge 3-47 Check oil level in hydraulic tank, add oil 3-49 Check alternator drive belt tension, adjust 3-50 Check level of battery electrolyte 3-51 Check oil level in damper case, add oil 3-52 Check brake performance 3-53 EVERY 500 HOURS SERVICE Replace transmission filter element, transmission lubricating filter element and torque converter filter element Replace fuel filter cartridge 3-54 3-55 Check oil level in final drive case, add oil 3-56 3-57 Replace corrosion resistor cartridge 3-20