Komatsu — 24.2 WHEN REQUIRED

24. SERVICE PROCEDURE 24.2.7 CHECK AND CLEAN RADIATOR FIN AND OIL COOLER FIN When the radiator fin and the oil cooler fin block with mud, dirt or leaves, clean it as follows. 1. Loosen bolts 0 and open radiator grille 0. 2. Mud, dust, or leaves blocking the fin shall be blown off by compressed air. Steam or water may also be employed in- stead of compressed air. REMARK Check the rubber hose on this occasion and replace hose that is cracked or fragile. Further, also inspect loosened hose clamps. 3-35