Komatsu — 24.4 EVERY 250 HOURS SERVICE

24. SERVICE PROCEDURE 24.4.5 CHECK LEVEL OF BATTERY ELECTROLYTE I Carry out this check before operating the machine. A l To avoid gas explosions, near the battery. l Battery electrolyte is dangerous. If it gets in your eyes or on your skin, wash it off with large amounts of water, and consult a doctor. 1. Open the battery cover. 2. Remove cap 0, and check that the electrolyte is at the specified level (10 to 12 mm (0.40 to 0.47 in) above the plate). If the electrolyte level is low, add distilled water to the specified level. If the battery electrolyte is spilled, have dilute sulphuric acid added. 3.

When adding distilled water to any cell at cap 0, add dis- tilled water also to the other cells. 4. Clean the air hole in the battery cap, then tighten the cap securely. NOTICE When adding distilled water in cold weather, add it be- fore starting operations in the morning to prevent the elec- trolyte from freezing. 3-51