24.7.5 CHECK OIL LEVEL IN PIVOT BEARING, ADD OIL Remove plug 0. When removing plug 0, be careful not to let dirt or dust get in. Check that the oil is at the level shown in the diagram. If the oil level is low, add engine oil (CD Class SAE30, re- gardless of the ambient temperature) through the hole for plug 0. A-A FIX-495 24.7.6 CLEAN ENGINE BREATHER ELEMENT 1. Wipe off all the dirt around the breather on the cam fol- lower cover. 2. Remove the breather. 3. Wash the whole breather in diesel oil or flushing oil, then blow it dry with compressed air. 4. Replace the breather O-ring with a new part, coat with en- gine oil, and install it.
24.7.7 CHECK OIL LEAKAGE FROM GEAR COUPLING Check that there is no oil leakage. If any abnormality is found, contact your Komatsu distributor for disassembly and repair or replacement. 3-67