11. EXPLANATION OF COMPONENTS 2. POWER TRAIN OIL TEMPERATURE GAUGE This gauge indicates the oil temperature of the torque con- verter outlet. If the temperature is normal during operation, the green range will light. If the red range lights up during operation, move the fuel control lever to lower the engine speed to approx. 3/4 of the full speed, reduce the load and run until the oil temperature enters the green range. If the power train oil temperature enters the red range, and the power train oil temperature monitor flashes and the alarm buzzer sounds, stop the machine and run at low idling until the oil temperature enters the green range.
Red \I B lIEI H -C Green’ NOTICE If the power train oil temperature gauge often enters the red range, we recommend you to lower the travel speed one range (for example, F2 -+ Fl) to reduce the load on the power train when operating. 3. FUEL GAUGE This gauge indicates the amount of fuel in the fuel tank. If there is enough fuel in the tank while the engine is running, the green range lights. If the red range lights, there is less than 360 liters of fuel in the tank. When the red range lights, add fuel. Green Red 4. SERVICE METER This meter shows the total operation hours of the ma- chine. The service meter advances while the engine is running - even if the machine is not traveling.
Set the periodic maintenance intervals using this display. When the engine is running, the green pilot lamp at the top of the meters flashes to indicate that the meter is ad- vancing. Meter will advance by 1 for each hour of operation regardless of the engine speed. I / llil 18 2-11