Komatsu — 12.8 STOPPING MACHINE

12.8 STOPPING MACHINE A WARNING l Avoid stopping suddenly. Give yourself ample room when stopping. l When stopping the machine, select flat hard ground and avoid dangerous places. If it is unavoidably necessary to park the machine on a slope, place the brake lock lever in the LOCK position and insert blocks underneath the track shoes. As an additional safety measure, thrust the blade into the ground. l If the blade control lever or the ripper control lever is touched by accident, the work equipment may move suddenly, and this may lead to a serious accident. Be- fore leaving the operator’s seat, always operate the safety lock to place it securely at the LOCK position. 1.

Lower engine speed by operating fuel control lever 0. 2. Place gear shift lever @ in N (neutral) position. 3. Depress brake pedal 0 to stop the machine. 2-54