12. OPERATION 12.9 PRECAUTIONS FOR OPERATION 12.9.1 PAY ATTENTION TO GAUGES When the red range lights on the power train oil tempera- ture gauge while operating, reduce load and wait for lowering of temperature. 12.9.2 METHOD OF USING STEERING CLUTCH If the steering clutch one side is used frequently or if many gradual turns are made with steering clutch half-en- gaged, the steering clutch will wear out in a short time. De- sign the travel road well and steer the machine properly. 12.9.3 PERMISSIBLE WATER DEPTH When operating in water, always keep top surface 0 of the track frame above the surface of the water. Also, be careful that the engine cooling fan will not come in contact with water.
The fan can be damaged. 12.9.4 PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS Method of using decelerator pedal When stepping on the decelerator pedal while going uphill, climbing ability will be reduced and the machine will stop. Furthermore, the engne sometimes will stall. Use engine as a brake When going downhill, shift gear shift lever into low speed to run engine at slow speed and travel down slope using the engine as a brake. When traveling down hills of more than IS’, shift down to 1st speed (RI or Fl). Braking when traveling downhill While descending a slope using the engine as a brake, also apply the brakes. Failure to brake may result in overrunning, causing engine trouble. 2-55