Komatsu — PERIODICAL PART REPLACEMENT

MAINTENANCE WEAR PARTS REPLACEMENT Wear parts such as filters, filter elements, cutting edge, etc. are to be replaced at the time of scheduled maintenance or before their functional and serviceable limits. The wear parts should be changed correctly in order to use the machine economically. Use genuine parts specified in the Parts Book as replacement parts.

II Part Description Quantity Replacement Interval I I Engine oil filter 2 Every 250 hours service Transmission oil filter element 1 Fuel filter 1 Everv 500 hours service Every 800 hours service Hydraulic tank oil filter element 1 Everv 1000 hours service Hydraulic tank breather element 1 Every 1000 hours service Air cleaner element 2 When required Engine fan drive belt 1 Bucket teeth - if equipped 8 When required When required Bucket bolt-on cutting edge 3 When reouired PERIODICAL PART REPLACEMENT The users of the machine should carry out periodical maintenance in order to ensure proper and safe operation.

The parts, listed below, should be replaced periodically so that the highest safety standard can be maintained. If any abnormality should be found, these parts must be replaced or repaired even before the predetermined period expires. Periodical part replacement cost does not imply reimbursement under the manufacture’s warranty policy. Refer to the warranty manual for further details. These parts with the passage of time may have a tendency to deteriorate in quality and to wear or deform. These parts must be replaced with new ones after a predetermined replacement interval even though there is no apparent abnormality.

Part description I Replacement interval I Remarks Brake hoses Every year Piston and packing of service brake master cylinder Every year Replace with repair kit Packings, seals, O-ring of steering cylinders Every 2 years Rubber hoses for steering cylinders Every 2 years Fuel hoses Every 2 years 3-9