MAINTENANCE DCA4 Unit Guide Fleetguard Part No.
DCA4 Units DCA4 Coolant Filter WF-2070 WF-2071 WF-2072 WF-2073 WF-2074 WF-2075 WF-2076 WF-2077 2 4 6 8 12 15 23 0 DCA4 Liquid DCASOL DCA80L 4 (1 Pint) 1760 (55 US gal) DCA4 Powder DCA95 20 DCA4 Precharcre and Service Filters System Capacity Precharge Filter (See NOTE 1) Service Filter (See NOTE 3) Liters Gallons II WF-2070 WF-2071 WF-2071 WF-2071 WF-2072 118-190 31-50 (See NOTE 2) WF-2073 19-26 5-7 WF-2072 3038 8-l 0 WF-2073 42-57 11-15 WF-2074 61-76 16-20 WF-2075 80-114 21-30 WF-2076 NOTE 1 -After draining and replacing coolant, always precharge the cooling system to maintain the DCA4 concentration between 1.0 and 2.0 units per 3.8 Q (1 US gal). NOTE:
When performing service which requires draining the woiing system, discard the coolant Reusing coolant can introduce contaminates or over concenbated chemicals, resulting in premature failure of cooling system components. NOTE 2 - To precharge cooling systems larger than 114 P (30 gal) do the following: 0 The answer represents the additional units required to precharge the cooling system. Four bottles of powder, part number DCA95, will provide a sufficient amount of DCA4 units (80) to precharge the example cooling system. l Install appropriate service filter listed in the above table based on cooling system capacity. Example:
95 gal (360 P) cooling system capacity -15 Units (1) WF-2075 Filter 80 Units 0 Install the appropriate service filter at the next and subsequent maintenance intervals. 3-16