MAINTENANCE CLEANING OR REPLACING OUTER ELEMENT A WARNING! Do not clean or replace the air cleaner element with the engine running. 1. Remove cover wing nut (2) and remove cover (3). 2. Remove wing nut (4) and remove outer element. 3. Clean the air cleaner body interior and the removed cover. 4. Clean and inspect the element. (See the item “Cleaning outer element” for cleaning procedure.) 5. Install the cleaned element. 6. Push the service indicator reset button to return the red piston to the original position. * Replace the outer element which has been cleaned six times repeatedly or used throughout a year. Replace the inner element at the same time.
* Replace both inner and outer elements when the service indicator red piston appears soon after installing the cleaned outer element even though it has not been cleaned six times. * Remove one seal from the outer element. The number of times the outer element has been cleaned can be seen by the number of removed seals. * Check inner element mounting nuts for looseness and, if necessary, re-tighten. * Replace seal washer (5) or wing nut (4) if they are damaged. REPLACING INNER ELEMENT A WARNING! Do not clean or replace the air cleaner element with the engine running. 4. Install a new inner element and tighten it with nuts. 1. First remove the end cover and the outer element, 5.
Install the outer element and the end cover. Push and then remove the inner element. the service indicator reset button. 2. Place a protective cover over the air intake part to prevent dust from entering. 3. Clean the air cleaner body interior, then remove the cover from the air intake port. A WARNING! Do not attempt to reinstall a AA cleaned inner element. 3-25