Komatsu — TRANSMISSION OIL AND STRAINER

MAINTENANCE TRANSMISSION CASEBREATHER Remove all mud and dirt from then remove the breather. Put clean the breather. around the breather, in cleaning fluid and TRANSMISSION OIL AND STRAINER 1. Loosen drain plug (P) to drain oil. After draining off the oil, tighten up drain plug (P). * After loosening drain plug (P), pull out the plug slowly to prevent the oil spouting out. 2. Loosen drain plug (1) of transmission oil filter to drain oil. After draining off the oil, tighten up drain plug (1). 3. Remove bolt (2) and cover (3) then remove strainer (4). 4. Remove all dirt from the surface of strainer (4), then wash in clean light oil. If strainer (4) is damaged, replace with a new part. 5.

Install strainer (4) in cover (3). Replace the O-ring of the cover with a new part, then install the cover. 3-49