MAINTENANCE * The fan hub should spin freely without excessive end play. 5. Install the drive belt (1). I I 06Bgpls I EVERY 2000 HOURS SERVICE * Maintenance for every 50, 100, 250, 500 and 1000 hours should be carried out at the same time. DRIVE AXLES * Use the same procedure to change the oil for the front and rear axles. Front 1. Remove front and rear oil filler plugs (i), then remove drain plugs (2) to drain the oil. 2. After draining the oil, clean drain plugs (2), then install them. 3. Add oil to the specified level through the oil filler ports of the axle housing. 4. Check the oil level and ensure that is correct. (Refer to WHEN REQUIRED.) 3-54