MAINTENANCE HYDRAULIC TANK BREATHER Loosen bolt (1) at the top of the cap. Turn wrench (2) clockwise and hold it, then remove the cap by turning it counterclockwise to take out the element. Coat the O-ring of the new element with grease, then install the element. Align the cap with the body and tighten the bolts. BRAKE DISC Ask your distributor to check and repair brake disc. VIBRATION DAMPER 1. Check the index lines (A) on the damper hub and the inertia member (B). If the lines are more than 1.59 mm out of alignment, replace the damper. 2. Inspect the rubber member for deterioration.
If pieces of rubber are missing or if the elastic member is more than 3.18 mm below the metal surface, replace the damper. 3-56