Komatsu — WORK EQUIPMENT CONTROL LEVER

OPERATION 8. WORK EQUIPMENT CONTROL LEVER This lever is used to operate the lift arm and the bucket. 1 Raise 2 Hold: The lift arm and the bucket are kept in the same position. 3 Lower 4 Float: The lift arm moves external force. freely under 5 Tilt 6 Dump * When the work equipment control lever is pulled further from 1 position, the lever is stopped in this position until the left arm reaches the preset position of kick-out, and the lever is backed to hold position. * When the work equipment control lever is pulled further from 5 position, the lever is stopped in this position until the bucket reaches the preset position of the bucket positioner, and the lever is backed to the hold position.

2-15