Komatsu — COLD WEATHER STARTING

OPERATION COLD WEATHER STARTING lllAMUnR7 3 ,a a : * ,z A When starting the engine in low temperatures, do as follows. 1. Turn the key of starting switch (1) to the ON position. 2. Move ether start switch (2) to the ON position, then release it immediately. Do NOT hold it at the ON position for more than 5 seconds. This will cause failure of the ether start valve solenoid. _______ _______. C * If the engine does not start, repeat this 2-3 times. * If the engine does not start, repeat the starting procedure after about 2 minutes. A = OFF B = ON C = START 2-32