Komatsu — OPERATIONS AFTER STOPPING ENGINE

OPERATION TO STOP THE ENGINE 1. Run the engine at low idling speed for about 5 minutes to allow it to gradually cool down. 2. Return starting switch (1) to the OFF position and remove the key. * If the engine is abruptly stopped before it has cooled down, engine life may be greatly short- ened. Consequently, do not abruptly stop the engine apart from an emergency. * In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. 1 = OFF 2 = ON 3 = START OPERATIONS AFTER STOPPING ENGINE Walk around the machine and check the work equipment and tires, also check for oil or coolant leakage.

If any abnormalities are found, repair them. 3. Check the engine compartment for foreign matter and debris. If found, remove the matter and/or debris to avoid a possible fire hazard. Fill the fuel tank. 4. Remove any mud stuck to the underside of the machine. 2-39