Komatsu — PROCEDURE FOR MOVING R.H. LADDER

OPERATION PARKING MACHINE A WARNING! Never leave the machine with the engine running or the bucket raised. When parking the machine, stop the engine, lower the bucket to the ground, place the transmission in neutral (N), apply the parking brake, turn off the electrical starting switch, and remove the key. WARNING! Before starting the engine or when the machine is standing with the engine running: Place the transmission in neutral (N), apply the parking brake, and lower all raised work equipment. Park machine in an area free of grease and fuel puddles which cause tire deterioration. A WARNING! Park the machine in a non- traffic area.

If parking in traffic lanes cannot be avoided, provide appropriate flags, barriers, flares and warning signals. Also provide advance warning signals in the traffic lane for approaching traffic. Lower hydraulically supported equipment to the ground to avoid unexpected movement and damage possibilities. Park on level ground to obtain accurate coolant, lubricant and fuel level checks. A WARNING! Avoid parking on a slop because unexpected machine movement may occur. If necessary to park on a slope, park at a right angle to the slope and block the tires. WARNING! Always lock up the machine, including any anti-vandalism attachment, when leaving it unattended.

A PRECAUTIONS WHEN TIRE CHAINS ARE FllTED If the machine is to be driven at high speed with chains fitted, care must be taken to maintain the clearance between the tire chains and the chassis (ladder). To maintain the clearance, move the ladder to the front as follows. PROCEDURE FOR MOVING R.H. LADDER 1. Remove bolts (l), (2) (3), and (4). L13BMOl , = Front B = Ladder C = Hydraulic Tank 2-46