Komatsu — V-Shape Loading

OPERATION LOAD AND CARRY OPERATIONS Load and carry operation is a series of processes (scooping - carrying - loading to a hopper or glory hole) carried out by the wheel loader. * Always maintain the road in good condition. A WARNING! Lower the bucket to bring down the center of gravity when carrying material. LOADING Select and proceed effective operation which avails less turning and the shortest hauling distance according to ground conditions. Cross Drive Loading When a wheel loader is operated, the digging should be made at a right angle toward accumulated soil. When the scooping is completed, the machine should be traveled backwards as it is.

Then, bring the truck between the accumulated soil and the wheel loader for the A purpose of loading upon the dump truck. WARNING! Provide a flat road free of rocks and hollows. When the boom is raised with the bucket loaded, do not make quick turns or quick braking because it is very dangerous. A WARNING! Do not load the bucket by thrusting into a pile of soil or gravel at high speed because it is dangerous. LI7czo2: V-Shape Loading Stop the truck with the angle of about 60” toward the scooping direction of the wheel loader. After scooping the soil, back the wheel loader in such a way that it makes a right angle to the truck.

The loading on the truck is made by the wheel loader going forward. The smaller the turning angle, the higher the efficiency. However, turning of 90” can be made if necessary. L17CZO2: 2-45