24. SERVICE PROCEDURE 24.7 EVERY 1000 HOURS SERVICE Maintenance for every 50,250 and 500 hours service should be carried out at the same time. 24.7.1 CHANGE OIL IN TRANSMISSION CASE, CLEAN STRAINER Arh WARNING The oil is at high temperature immediately after the machine has operated. Wait for the oil to cool down before starting the operation. Prepare the followings. l l Container to catch drained oil: Min. 13 I? capacity Refill capacity.13 e (3.43 US gal, 2.86 UK gal) Socket wrench 0 1. Remove the cover at the bottom of the machine, and set a container to catch the oil under drain plug @. 2. Remove drain plug @slowly to avoid getting oil on yourself, and drain the oil.
After drajning the oil, tighten the drain plug @. 3. Remove mounting bolts @ on tube 0, remove lowest mounting bolt @ on strainer case @ then take out tube 0. 4. Take out strainer 0. If strainer @ is damaged, replace it with new one. 5. Remove all dirt from the strainer, then wash in clean diesel oil or flushing oil. Clean the case interior and the removed parts. AE217730 6. After installing the strainer, refill the specified quantity of engine oil through oil filler 0. NOTICE For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 3-51