24. SERVICE PROCEDURE 7. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING”. 8. Keep the steering, directional and speed lever at the N (neutral) position, and move the lever fully in the left direction. Next, move the lever fully in the right direction. Repeat this operation 10 times and fill the steering and brake circuits with oil. 9. Travel the machine at first speed and check that the machine can make a left turn and a right turn certainly. 24.7.2 CHANGE OIL IN TRANSFER CASE (INCL. BEVEL GEAR CASE) The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation.
a WARNING Prepare the followings. Container to catch drained oil: Min. 17 e capacity Refill capacity: 17 J? (4.49 US gal, 3.74 UK gal) Socket wrench Set a container to catch the oil under drain plug @ at the bottom of the machine. Remove drain plug @ slowly to avoid getting oil on yourself, and drain the oil. After draining the oil, tighten drain plug 8. Refill the specified quantity of engine oil through oil filler 0. NOTICE For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. \I AE218800 1 4. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING” 3-52