Komatsu — 11.3 CONTROL LEVERS AND PEDALS

11. EXPLANATION OF COMPONENTS 11.3 CONTROL LEVERS AND PEDALS Hydraulic tiltdozer Hydrau I ic angle-tiltdozer I\ AE21809B b 5 AE218079 1. STEERING, DIRECTIONAL AND SPEED LEVER This lever is used to switch between forward and reverse, to shift the transmission gear, speed to steer the machine, and to perform spin turns. Forward-reverse shifting 0: FORWARD 0: REVERSE @: NEUTRAL Push the lever forward, the machine will move off forward. Pull the lever backward, the machine will move off in reverse. I Steering Q: LEFT TURN 8: RIGHT TURN If the lever is moved partially in the direction to turn the machine, the steering clutch is disengaged and the machine will turn gradu- ally.

If the lever is moved more, the steering brake is applied and the machine will turn on the spot. If the lever is released when steering the machine, the lever will return to the @ position or the @ position and the machine will be returned to straight movement. Lever guide REMARK When starting the engine, check that the levers are at the N position and that the safety lever is at the LOCK position. If they are not at these positions the engine will not start. \ AE218118 2-8