11. EXPLANATION OF COMPONENTS Gear shifting Shift the gear by turning the steering, directional and speed lever in the range of 30”. @: First speed @ Second speed 0: Third speed REMARK If the gear is shifted, the speed is indicated in the indicator window at the rear of the lever. First speed: 1-1, is indicated in the indicator window. Second speed: i?, is indicated in the indicator window. Third speed: (3 is indicated in the indicator window. 2. SAFETY LEVER (For steering, directional speed lever) IA WARNING l When leaving the operator’s compartment, set the safety lever securely to the LOCK position.
If the control lever is not locked, and it is touched by mistake, this may lead to a serious accident. I the control lever may not be properly locked. , l If the safety lever is not placed securely in the LOCK position, This locks the steering and directional lever. Move the steering and directional lever to the N (neutral) position and lower the lever to apply the lock. REMARK If the safety lever is not in the LOCK position, the engine cannot be started. 3. FUEL CONTROL LEVER (For machines stopped by fuel control lever) This lever is used to control the engine speed and output. Engine stop position: Push the lever fully. Low idling position:
Pull the lever from engine stop position @I until you feel the operating force falls 0 0 Off. High idling position: Pull the lever fully. 0 3. FUEL CONTROL LEVER (For machines stopped by starting switch) This lever is used to control the engine speed and output. Low idling position: Push the lever fully. High idling position: Pull the lever fully. 0 0 2-9