256 Engine Start and Operation Engine Operation General Proper operation, driving techniques and maintenance are key factors in obtaining the maximum life and economy from a modern turbocharged diesel engine. This section has operational information about the components that make up the engine. For the best operation economy, see “Fuel Economy” page 237. When changing gears, avoid lugging to extend engine life. When the engine is op- erating at full throttle and maximum governed speed cannot be reached or main- tained, the engine is lugging . When approaching a hill requiring more power, it is necessary to downshift the transmission as the vehicle goes into the grade.
Acceler- ating to the governed engine speed will give additional power at approximately the same road speed. For shifting instructions, see the transmission manufacturer’s Opera- tor’s Manual. Always start moving the load in a gear low enough so that the engine can be acceler- ated to the governed speed. Then shift to the next gear as the engine decelerates. For loaded vehicles, do not skip a gear or lug the engine while getting up to cruising speed. For empty or light loads, it is per- missible to skip gears.
When operating on a level highway or at cruising speed, hold the engine speed at ap- proximately 75 to 85 percent of governed speed (1400 to 1600 r/min for large dis- placement engines) to achieve power and economical fuel consumption.