volvo — Volvo VNL and VNM Operator's Manual

42 Pre-Trip Inspection and Daily Maintenance Step 11: Right Rear Trailer Wheel tween lining and drum (This check cannot be made if dust covers are in place). Dual Wheels, One Or Two Axles Check condition of wheels and rims. Especially look for cracks, missing lockrings, bent or broken spacers, studs, clamps or lugs. Condition of brake hoses: check for any chafing. Check brake chamber mounting bolts and brackets. Check condition of tires: properly in- flated, no serious cuts, bulges, tread wear or any signs of misalignment; valve stems not touching wheels, rims or brake drums; valve caps in place and no objects stuck between the wheels. Check slack adjusters and chamber push rod travel.

With brakes applied or released, look for conspicuously dif- ferent positions of the slack adjusters. Check spring brakes. Check that both tires are of same type, for example, not mixed radial and bias type and that their circumferences are matched. Step 12: Rear of Trailer Area Lights and Reflectors Check wheel bearing and hub: no obvi- ous leaking on outside or inside wheel. Rear clearance, identification and tail lights clean, operating and proper color. Suspension Reflectors clean and proper color. Condition of springs (leaf or air), spring hangers, shackles and U-bolts. Cargo Securement Axle alignment. Cargo properly blocked, braced, tied, chained, etc. Condition of torque rod arms.

If equipped with sliding axles, check position and alignment. Look for dam- aged, worn or missing parts, all locks present, fully in place and locked. Tailboard up and properly secured. End gates free from damage, properly secured in stake pockets. Canvas or tarp (if required) properly latched down to prevent water damage, tearing, billowing or blockage of either mirrors or tail lights. Flexible air tubing not cracked, cut, crimped or otherwise damaged. Se- cured against tangling, dragging and chafing. Rear doors securely closed, latched or locked; required security seals in place. Brakes Condition of brake drums. With brakes released, look for a noticeable gap be- Underside guard in place:

not cracked, bent or broken.